Rohm Breadcrumb

 

Kionix Productdetail

 
product-image
 

KX134-1211
TRI-AXIS 16-BIT ACCELEROMETERS SUPPORTING RANGES FROM ±8G TO ±64G, DIGITAL (I²C/SPI) OUTPUT, ADVANCED DATA PATH, ADVANCED WAKE-UP/BACK-TO-SLEEP ENGINE, FIFO BUFFER, -40°C TO +105°C OPERATING TEMPERATURE RANGE, EMBEDDED TEMPERATURE SENSOR IN A 2X2X0.9MM LGA 12-PIN - KX134-1211

The KX134-1211 is a tri-axis ±8g, ±16g, ±32g, ±64g silicon micromachined accelerometer featuring a user-configurable 3 stage Advanced Data Path (ADP) consisting of a low-pass filter, low-pass/high-pass filter, and RMS calculation engine. The new KX132-1211 accelerometers also feature advanced Wake-Up and Back-to-Sleep detection with a high-resolution threshold capability configurable down to 15.6mg, embedded temperature sensor, 512-byte buffer that continues to record data even when being read, and embedded engines for orientation, Directional-TapTM/Double-TapTM, and Free fall detection. The sense element is fabricated using Kionix’s proprietary plasma micromachining process technology. Acceleration sensing is based on the principle of a differential capacitance arising from acceleration-induced motion of the sense element, which further utilizes common mode cancellation to decrease errors from process variation, temperature, and environmental stress. The sense element is hermetically sealed at the wafer level by bonding a second silicon lid wafer to the device wafer. A separate ASIC device packaged with the sense element provides signal conditioning and intelligent user-programmable application algorithms. The new KX134-1211 accelerometers offer lower noise and improved linearity over of the entire temperature range. The accelerometer is delivered in a 2 x 2 x 0.9 mm LGA 12-pin plastic package operating from a 1.7V – 3.6V (VDD) / 1.2V-3.6V (IO_VDD) DC supplies. Internal voltage regulators are used to maintain constant internal operating voltages over the range of input supply voltages. This results in stable operating characteristics even if the supply voltage changes. I²C or SPI digital protocol is supported to configure the chip, read acceleration outputs, and check for updates to the orientation, Directional-TapTM/Double-TapTM detection, Free fall detection, and activity monitoring algorithms. Two configurable interrupt pins are also available to show the output of the embedded detection algorithms.

특징

  • Advanced Data Path with user configurable 3 stages consisting of a low-pass filter, low-pass / high-pass filter, and RMS engine.
  • High Temperature Range -40°C to +105°C
  • Integrated Free fall, Directional-Tap/Double-Tap™, and Device-orientation Algorithms
  • Advanced Wake-Up and Back-to-Sleep detection with high-resolution threshold configurable down to 15.6mg
  • Embedded 512-byte FIFO buffer with capability to record data even when being read
  • Embedded temperature sensor
  • User-selectable Output Data Rate up to 25600Hz
  • User accessible manufacturer and part ID registers

관련 제품

제품 사양

중력 범위(g-range) 가속도계 민감도 잡음 (µg/√Hz) 해상도 패키지 크기 핀 및 패키지 유형 인터페이스(출력) 웨이크업 작동 온도 (Min.)[°C] 작동 온도 (Max.)[°C] 공급 전압 [V] 전류 소비량
3 8g to 64g 4096 to 512 counts/g 300 8-bit, 16-bit 2x2x0.9mm 12-pin LGA Digital SPI/I²C Yes -40 105 1.7-3.6 0.5-162 μA

평가 보드

제품 번호 지금 구매 설명 문서
KX134-1211-EVB110 Cart KX134-1211 Evaluation Board

개발자 도구

지금 구매 설명
IoT Evaluation and Development Kit Cart Kionix's IoT evaluation kit utilizes hardware platform based on Nordic Semiconductor's Bluetooth LE SoC. The compact (27/32mm x 4.2mm), highly integrated modular sensor system integrates Kionix's accelerometer (KX122-1037), combo accel-mag (KMX62-1031), and combo accel-gyro (KXG07) sensors along with ROHM's barometric pressure sensor (BM1383AGLV). Additional sensors can be evaluated using the add-on board that can fit inside the kit. This enables measurement of 3D acceleration, 3D magnetism, 3D rotation, air pressure, and temperature, making it ideal for training, prototyping, and initial set development of IoT and wearable applications.